Gentec-EO U-LINK (USB) PC Interface Description：

Datasheet(CN) Datasheet(EN) User's Manual PC-Gentec-EO User's Manual

Gentec-EO U-LINK (USB) PC interface for power & energy measurement. Single-channel, USB output.

Use it with our included PC-Gentec-EO software

Read your measurements directly on your PC thanks to our free proprietary software PC-Gentec-EO. The software supports the following product series: P-LINK, HP, INTEGRA, U-LINK, and MAESTRO.

Practical displays: real-time, scope, needle, averaging, histogram, and statistics

Useful features such as data logging and correction factors

Many statistics available: current value, average value, maximum value, minimum value, RMS stability, PTP stability, repetition rate, average power, and STD deviation

Leverage serial commands

Use our serial commands to communicate directly with the meter without using Gentec-EO's software. You can do so using a terminal emulator software, like PuTTY, or you can just integrate them directly into your own software. All essential functions of the meter are covered by a command. Refer to the user manual of the meter for the list of all commands available.

Build your own software

Suit your unique laser application requirements

Automate your measurements

Key Features

The universal meter

Power: thermopiles, photodetectors and pyroelectrics

Energy: thermopiles (in single shot mode), photodetectors and pyroelectrics

Measure fJ energy levels

Thanks to a unique digital method for suppressing the noise on the lower ranges

External trigger

Synchronize your U-LINK to your pulsed laser or digital chopper

Serial commands

Serial commands are available on both versions to let you take full control

Real-time statistical functions

Max, min, average, standard deviation, RMS and PTP stability

Synchronize multiple channels

With the "SYNC. OUT" port, you can plug multiple U-LINK devices together and create a low-cost multi-channel system.

Specifications